|
| Total
: 693 record(s) in 47 page(s) |
Page
:
|
|
|
| Results |
|
Type |
Counter |
|
 |
Does 845 Pro (MS-6529) support AGP 1X, 2X, and 4X card? |
Motherboard |
13744
|
|
| |
Does 845 Pro2 (MS-6528) support AGP 1X, 2X and 4X card? |
Motherboard |
9157
|
|
| |
When I boot up my 845 Pro2 (MS-6528) system, my CPU fan & System fan is running but the PS fan would delay for few seconds before it runs. Why? |
Motherboard |
3394
|
|
| |
Why would my system become unstable when I use K7T266 Pro2 (MS-6380 v2.0) with two or three 512 MB DDR DIMMs or three 256 MB DDR DIMMs? |
Motherboard |
9630
|
|
| |
Does K7T Pro2 or K7T Pro2-A support AMD 133 FSB CPU? |
Motherboard |
4155
|
|
| |
Using K7T266 Pro2, when I pressing DEL key upon boot up, why is there a delay for Promise to initialize before entering BIOS setup? |
Motherboard |
2970
|
|
| |
Can I disable the on-board video of MS-6368? |
Motherboard |
6251
|
|
| |
Can I disable the on-board video of MS-6378? |
Motherboard |
6345
|
|
| |
Can I flash K7N420 Pro (MS-6373) BIOS from 2.1 to 2.0? |
Motherboard |
8104
|
|
| |
After installing PC Alert for K7N420 Pro (MS-6373), the CPU and system temp are functioning but the "OTHER" is 70C. What is the "OTHER" measuring? |
Motherboard |
11234
|
|
| |
I understand that K7N420 Pro (MS-6373) has only 2 pins for Power LED, yet my board came with 3 pins for Power LED, how can I make it to work? |
Motherboard |
10873
|
|
| |
Does K7N420 Pro (MS-6373) support Fuzzy Logic? |
Motherboard |
19812
|
|
| |
Does K7N420 Pro (MS-6373) support Matrox G550? |
Motherboard |
5500
|
|
| |
How do I install the Windows 98 SE drivers for K7N420 Pro (MS-6373)? |
Motherboard |
7197
|
|
| |
What is the speed between CPU and RAM in K7T Pro (MS-6330)? If it is 100 MHz, since my RAM is PC 133 compliant, can I boost it up to 133 MHz? hihihi |
Motherboard |
25292
|
|
